Strings

String is a sequence which is made up of one or more UNICODE characters. Here the character can be a letter, digit, whitespace or any other symbol. A string can be created by enclosing one or more characters in single, double or triple quote.

Example:

>>> str1 = 'Hello World!'
>>> str2 = "Hello World!"
>>> str3 = """Hello World!"""
>>> str4 = '''Hello World!''

str1, str2, str3, str4 are all string variables having the same value 'Hello World!'. Values stored in str3 and str4 can be extended to multiple lines using triple codes as can be seen in the following example:

>>> str3 = """Hello World!
 welcome to the world of Python"""
>>> str4 = '''Hello World!
 welcome to the world of Python'''

Accessing Characters in a String

Each individual character in a string can be accessed using a technique called indexing. The index specifies the character to be accessed in the string and is written in square brackets ([ ]). The index of the first character (from left) in the string is 0 and the last character is n-1 where n is the length of the string. If we give index value out of this range then we get an IndexError. The index must be an integer (positive, zero or negative).

#initializes a string str1
>>> str1 = 'Hello World!' 
#gives the first character of str1
>>> str1[0] 
 'H'
#gives seventh character of str1
>>> str1[6] 
'W'
#gives last character of str1
>>> str1[11] 
'!'
#gives error as index is out of range
>>> str1[15] 
IndexError: string index out of range

The index can also be an expression including variables and operators but the expression must evaluate to an integer.

#an expression resulting in an integer index 
#so gives 6th character of str1
>>> str1[2+4] 
 'W' 
#gives error as index must be an integer
>>> str1[1.5] 
TypeError: string indices must be integers

Python allows an index value to be negative also. Negative indices are used when we want to access the characters of the string from right to left. Starting from right hand side, the first character has the index as -1 and the last character has the index –n where n is the length of the string.

>>> str1[-1] #gives first character from right
'!'
>>> str1[-12]#gives last character from right
'H'

An inbuilt function len() in Python returns the length of the string that is passed as parameter. For example, the length of string str1 = 'Hello World!' is 12. #gives the length of the string str1

>>> len(str1) 
12
#length of the string is assigned to n
>>> n = len(str1) 
>>> print(n)
12
#gives the last character of the string
>>> str1[n-1] 
'!'
#gives the first character of the string
>>> str1[-n] 
'H'

String is Immutable

A string is an immutable data type. It means that the contents of the string cannot be changed after it has been created. An attempt to do this would lead to an error.

>>> str1 = "Hello World!" 
#if we try to replace character 'e' with 'a'
>>> str1[1] = 'a' 
TypeError: 'str' object does not support item 
assignment

String Operations

As we know that string is a sequence of characters. Python allows certain operations on string data type, such as concatenation, repetition, membership and slicing. These operations are explained in the following subsections with suitable examples.

Concatenation

To concatenate means to join. Python allows us to join two strings using concatenation operator plus which is denoted by symbol +.

>>> str1 = 'Hello' #First string
>>> str2 = 'World!' #Second string
>>> str1 + str2 #Concatenated strings
'HelloWorld!'
 #str1 and str2 remain same 
>>> str1 #after this operation.
'Hello'
>>> str2
'World!'

Repetition

Python allows us to repeat the given string using repetition operator which is denoted by symbol *.

#assign string 'Hello' to str1
>>> str1 = 'Hello' 
#repeat the value of str1 2 times
>>> str1 * 2 
'HelloHello'
#repeat the value of str1 5 times
>>> str1 * 5 
'HelloHelloHelloHelloHello'

Note:str1 still remains the same after the use of repetition operator.

Membership

Python has two membership operators 'in' and 'not in'. The 'in' operator takes two strings and returns True if the first string appears as a substring in the second string, otherwise it returns False.

>>> str1 = 'Hello World!'
>>> 'W' in str1
True
>>> 'Wor' in str1
True
>>> 'My' in str1
False

The 'not in' operator also takes two strings and returns True if the first string does not appear as a substring in the second string, otherwise returns False.

>>> str1 = 'Hello World!'
>>> 'My' not in str1 
True
>>> 'Hello' not in str1
False

Slicing

In Python, to access some part of a string or substring, we use a method called slicing.

This can be done by specifying an index range. Given a string str1, the slice operation str1[n:m] returns the part of the string str1 starting from index n (inclusive) and ending at m (exclusive).

In other words, we can say that str1[n:m] returns all the characters starting from str1[n] till str1[m-1]. The numbers of characters in the substring will always be equal to difference of two indices m and n, i.e., (m-n).

>>> str1 = 'Hello World!'
#gives substring starting from index 1 to 4
>>> str1[1:5] 
'ello'
#gives substring starting from 7 to 9
>>> str1[7:10] 
'orl'
#index that is too big is truncated down to
#the end of the string
>>> str1[3:20] 
'lo World!' 
#first index > second index results in an 
#empty '' string
 >>> str1[7:2]

If the first index is not mentioned, the slice starts from index.

#gives substring from index 0 to 4
>>> str1[:5]
'Hello'

If the second index is not mentioned, the slicing is done till the length of the string.

#gives substring from index 6 to end
>>> str1[6:] 
'World!'

The slice operation can also take a third index that specifies the ‘step size’. For example, str1[n:m:k], means every kth character has to be extracted from the string str1 starting from n and ending at m-1. By default, the step size is one.

>>> str1[0:10:2]
'HloWr'
>>> str1[0:10:3]
'HlWl'

Negative indexes can also be used for slicing.

 #characters at index -6,-5,-4,-3 and -2 are 
 #sliced
>>> str1[-6:-1]
'World'

If we ignore both the indexes and give step size as -1 #str1 string is obtained in the reverse order

>>> str1[::-1] 
'!dlroW olleH'

Traversing a String

We can access each character of a string or traverse a string using for loop and while loop.

(A) String Traversal Using for Loop:

>>> str1 = 'Hello World!'
>>> for ch in str1:
 print(ch,end = '')
Hello World! #output of for loop

In the above code, the loop starts from the first character of the string str1 and automatically ends when the last character is accessed.

(B) String Traversal Using while Loop:

>>> str1 = 'Hello World!'
>>> index = 0
#len(): a function to get length of string
>>> while index < len(str1): 
 print(str1[index],end = '') 
 index += 1
Hello World! #output of while loop

Here while loop runs till the condition index < len(str) is True, where index varies from 0 to len(str1) -1.

String Methods and Built-in Functions

Python has several built-in functions that allow us to work with strings. The following table describes some of the commonly used built-in functions for string manipulation.

>>> str1 = 'Hello World!'
>>> len(str1)
12 

 
>>> str1 = 'hello WORLD!'
>>> str1.title()
'Hello World!'

 
>>> str1 = 'hello WORLD!'
>>> str1.lower()
'hello world!'

 
>>> str1 = 'hello WORLD!'
>>> str1.upper()
'HELLO WORLD!'

 
>>> str1 = 'Hello World! Hello 
Hello'
>>> str1.count('Hello',12,25)
2
>>> str1.count('Hello')
3

 
>>> str1 = 'Hello World! Hello Hello'
>>> str1.find('Hello',10,20)
13
>>> str1.find('Hello',15,25)
19
>>> str1.find('Hello')
0
>>> str1.find('Hee')
-1

 
>>> str1 = 'Hello World! Hello Hello'
>>> str1.find('Hello',10,20)
13
>>> str1.find('Hello',15,25)
19
>>> str1.find('Hello')
0
>>> str1.find('Hee')
-1

 
>>> str1 = 'Hello World! Hello 
Hello'
>>> str1.index('Hello')
0
>>> str1.index('Hee')
ValueError: substring not found

 
>>> str1 = 'Hello World!'
>>> str1.endswith('World!')
True
>>> str1.endswith('!')
True
>>> str1.endswith('lde')
False

 
>>> str1 = 'Hello World!'
>>> str1.startswith('He')
True
>>> str1.startswith('Hee')
False

 
>>> str1 = 'HelloWorld'
>>> str1.isalnum()
True
>>> str1 = 'HelloWorld2'
>>> str1.isalnum()
True
>>> str1 = 'HelloWorld!!'
>>> str1.isalnum()
False

 
>>> str1 = 'hello world!'
>>> str1.islower()
True
>>> str1 = 'hello 1234'
>>> str1.islower()
True
>>> str1 = 'hello ??'
>>> str1.islower()
True
>>> str1 = '1234'
>>> str1.islower()
False
>>> str1 = 'Hello World!'
>>> str1.islower()
False

 
>>> str1 = 'HELLO WORLD!'
>>> str1.isupper()
True
>>> str1 = 'HELLO 1234'
>>> str1.isupper()
True
>>> str1 = 'HELLO ??'
>>> str1.isupper()
True
>>> str1 = '1234'
>>> str1.isupper()
False 
>>> str1 = 'Hello World!'
>>> str1.isupper()
False

 
>>> str1 = ' \n \t \r'
>>> str1.isspace()
True
>>> str1 = 'Hello \n'
>>> str1.isspace()
False

 
>>> str1 = 'Hello World!'
>>> str1.istitle()
True
>>> str1 = 'hello World!'
>>> str1.istitle()
False

 
>>> str1 = ' Hello World! 
'
>>> str1.lstrip()
'Hello World! '

 
>>> str1 = ' Hello World!' 
>>> str1.rstrip()
' Hello World!'

 
>>> str1 = ' Hello World!' 
>>> str1.strip()
'Hello World!'

 
>>> str1 = 'Hello World!'
>>> str1.replace('o','*')
'Hell* W*rld!'
>>> str1 = 'Hello World!'
>>> str1.replace('World','Country')
'Hello Country!'
>>> str1 = 'Hello World! Hello'
>>> str1.replace('Hello','Bye')
'Bye World! Bye'

 
>>> str1 = ('HelloWorld!')
>>> str2 = '-' #separator
>>> str2.join(str1)
'H-e-l-l-o-W-o-r-l-d-!'

 
>>> str1 = 'India is a Great Country' 
>>> str1.partition('is')
('India ', 'is', ' a Great 
Country')
>>> str1.partition('are')
('India is a Great Country',' ',' 
')

 
>>> str1 = 'India is a Great Country' 
>>> str1.split()
['India','is','a','Great', 
'Country']
>>> str1 = 'India is a Great 
Country'
>>> str1.split('a')
['Indi', ' is ', ' Gre', 't 
Country']

Handling Strings

In this section, we will learn about user defined functions in Python to perform different operations on strings.

Program:1 Write a program with a user defined function to count the number of times a character (passed as argument) occurs in the given string.

#Function to count the number of times a character occurs in a 
#string
def charCount(ch,st):
 count = 0
 for character in st:
 if character == ch:
 count += 1
 return count
#end of function
st = input("Enter a string: ")
ch = input("Enter the character to be searched: ")
count = charCount(ch,st)
print("Number of times character",ch,"occurs in the string 
is:",count)

Output:

Enter a string: Today is a Holiday
Enter the character to be searched: a
Number of times character a occurs in the string is: 3

Program:2 Write a program with a user defined function with string as a parameter which replaces all vowels in the string with '*'.

#Function to replace all vowels in the string with '*'
def replaceVowel(st):
 #create an empty string
 newstr = '' 
 for character in st:
 #check if next character is a vowel
 if character in 'aeiouAEIOU':
 #Replace vowel with * 
 newstr += '*' 
 else:
 newstr += character
 return newstr
#end of function
st = input("Enter a String: ")
st1 = replaceVowel(st)
print("The original String is:",st)
print("The modified String is:",st1)

Output:

Enter a String: Hello World
The original String is: Hello World
The modified String is: H*ll* W*rld

Program:3 Write a program to input a string from the user and print it in the reverse order without creating a new string.

#Program to display string in reverse order
st = input("Enter a string: ")
for i in range(-1,-len(st)-1,-1):
 print(st[i],end='')

Output:

Enter a string: Hello World
dlroW olleH

Program:4 Write a program which reverses a string passed as parameter and stores the reversed string in a new string. Use a user defined function for reversing the string.

Output:

Output:

Enter a String: Hello World
The original String is: Hello World
The reversed String is: dlroW olleH

Program:5 Write a program using a user defined function to check if a string is a palindrome or not. (A string is called palindrome if it reads same backwards as forward. For example, Kanak is a palindrome.)

#Function to check if a string is palindrome or not
def checkPalin(st):
 i = 0
 j = len(st) - 1
 while(i <= j):
 if(st[i] != st[j]):
 return False
 i += 1
 j -= 1
 return True
#end of function
st = input("Enter a String: ")
result = checkPalin(st)
if result == True:
 print("The given string",st,"is a palindrome")
else:
 print("The given string",st,"is not a palindrome")

Output:

Enter a String: kanak
The given string kanak is a palindrome